Pioneer AVIC-N1 Benutzerhandbuch

➲ About error messages ➞ Appendix of the 

Operation Manual

The speed pulse data comes from the speed 
sensing circuit. The location of this speed sens-
ing circuit depends on your vehicle model. In 
some cases, it is impossible to make a connec-
tion to it, and in such a case we recommend that 
the ND-PG1 speed pulse generator (sold sepa-
rately) be used.

For various reasons such as the state of the road 
you are traveling on and the state of reception of 
the GPS signal, the actual position of your vehicle 
may differ from the position displayed on the map 
screen.
Some types of vehicle may not output a speed 
signal while driving at just a few miles per hour. 
In such a case, the current location of your vehi-
cle may not be displayed correctly while in a traf-
fic jam or in a car park.
• The current vehicle position cannot be dis-

played exactly under all conditions, due to vari-
ations in satellite reception, road conditions, 
the vehicle’s condition, and any objects in con-
tact with the antenna.

• Also, GPS reception may be unavailable during 

certain weather conditions, when driving in 
tunnels or garages, or when signal interfer-
ence may occur such as when driving between 
tall buildings or near large vehicles.

Some basic precautions are necessary when 
handling your discs.

• Do not use discs other than those intended for 

this product. Use only discs approved by Pio-
neer. 

➲ For suitable discs ➞ Page 7
❒ If you wish to use other navigation discs, 

first check that they are compatible with 
this equipment and approved by Pioneer.

• Use only normal, round discs. If you insert 

irregular, non-round, shaped discs they may 
jam in the DVD drive or not play properly.

• Check all discs for cracks, scratches or warp-

ing before playing. Discs that have cracks, 
scratches or are warped may not play properly. 
Do not use such discs.

• Avoid touching the recorded (non-printed side) 

surface when handling the disc.

• Store discs in their cases when not in use.
• Keep discs out of direct sunlight and do not 

expose the discs to high temperatures.

• Do not attach labels, write on or apply chemi-

cals to the surface of the discs.

• To clean dirt from a disc, wipe the disc with a 

soft cloth outward from the center of the disc.

• If the heater is used in cold weather, conden-

sation may form on components inside the 
DVD drive. Condensation may cause the DVD 
drive to not operate properly. If you think that 
condensation is a problem turn off the DVD 
drive for an hour or so to allow the DVD drive to 
dry out and wipe any damp discs with a soft 
cloth to remove the moisture.

• Road shocks may interrupt disc playback.

• With some DVD video discs, it may not be pos-

sible to use certain functions.