Technicolor - Thomson eu2845st Benutzerhandbuch

ENGLISH   - 19 -

• If the selected subcode page is not displayed in a

short time, press “

” button. TV programme will be

displayed on the screen.

• Teletext page number will be displayed on the upper

left corner of the screen when the selected page is

found.

•  Press  “

”  button  to  display  the  selected Teletext

page.

10 To exit Teletext

•  Press  “

”  button.  The  screen  will  switch  to  TV

mode.

11) To Display the Time

• While watching a TV programme with Teletext trans-

mission press “

” button. The current time informa-

tion, captured from Teletext will be displayed at the

upper right of the screen.

• If the programme being watched does not have Tele-

text transmission, no iformation will be displayed.

12) Fastext

Your CTV supports the 7 page Teletext system. When

the page number of any of the 7 pages in memory is

entered, the system will not search for the requested

page; instead it will display the page automatically.
•  Press  “ ”  button  to  move  the Teletext  screen  for-

ward one page at a time.

• Press “ ” button to move the Teletext screen back-

ward one page at a time.

For Fastext

The subject-heading for the information may have a

particular colour.
•  Press  an  appropriate  RED,  GREEN,  YELLOW  or

BLUE  button  in  order  to  reach  the  relevant  page

quickly.

Connect  Peripheral  Equipment

There is a wide range of audio and video equipment

that can be connected to your TV.
The  following  connection  diagrams  show  you  where

the  different  equipment  should  be  connected  at  the

back or the front side of the TV.

1) Via the Euroconnector

Your TV  set  has  two  Euroconnector  sockets.  If  you

want to connect peripherals (e.g. video, decoder, etc.)

which have Euroconnectors to your TV, use optional

EXT.1 or EXT.2 inputs.
If an external device is connected via EXT.1 Eurocon-

nector socket TV is switched to AV mode automatical-

ly. If the signal is RGB then the RGB OSD indicator is

displayed on the screen.

2) YCbCr Mode

This mode is only used for the equipment which have

YCbCr signal at their output. You can watch only YCb-

Cr  signal  at  this  mode.  RGB,  Y/C  or  CVBS  signals

can not be watched.

3) Via Ant Input

If you want to connect to your TV, peripherals like vid-

eo recorders or decoders, but the device you want to

connect  does  not  have  Euroconnector,  you  should

connect it to the ANT input of your TV set.
If the VCR is connected via antenna input it is sug-

4) Decoder

Cable TV offers you a wide choice of programs. Most

of them are free, others are to be paid for by the view-

er. This means that you will need to subscribe to the

broadcasting  organisation  whose  programmes  you

wish  to  receive.  This  organisation  will  supply  you  a

corresponding decoder unit to allow the programmes

to be unscrambled.
For further information ask your dealer. See also the

booklet supplied with your decoder.

a) Connect a decoder with an aerial socket

to the TV

• Connect the aerial cable.

b) Connect a decoder without an aerial

socket to the TV

• Connect the decoder to your TV with a eurocable to

EXT.1. When your decoder has a Euroconnector you

can  obtain  better  picture  quality  if  you  connect  a

eurocable to EXTERNAL.

5) TV and Video Recorder

• Connect the aerial cables.
Better picture quality can be obtained if you also con-

nect a eurocable to EXTERNAL sockets.

EU2845ST&2845W-MAV-1541-ENG-STEREO-AK45.p65

09.09.2003, 10:54

19