Technicolor - Thomson eu2845st Benutzerhandbuch

ENGLISH - 20 -

6) Playback NTSC

Connect NTSC VCR player to Euroconnector at the

back of the TV.
Connect NTSC VCR player to RCA Jack at the front of

the TV.

Then, press

button to select

(EXT-1, RGB, YCb-

Cr and F-AV)

7) Copy Facility

Source selection for VCR recording.
Select Features Menu in the MENU.
Select EXT-2 OUTPUT source pressing or

button.

8) Search for and store the test signal of the

video recorder

Unplug the aerial cable from the aerial socket ANT

of your video recorder.

Switch on your TV and put the video recorder on the

test signal. (See the handbook for your video re-

corder.)

Enter the Tuning menu via the Install menu.
Search for the test signal of your video recorder in

the same way as you searched for and stored the TV

signals. See Tuning, Search and Store TV channels.

Store the test signal under programme number 0.

Replace the aerial cable in the aerial socket ANT of

your video recorder once you have stored the test

signal.

9) Camera and Camcorder

To connect to Front-AV input (F-AV):

Connect your camera or camcorder at the front side of

your TV.
Connect your equipment to the TV via VIDEO (yel-

low), AUDIO R (red) and AUDIO L (white) inputs. You

should connect the jacks to the input in the same

colour.

10) Connect the decoder to the video

recorder

Some video recorders have a special euroconnector for

decoder.
Connect a eurocable to the euroconnector of your

decoder and to the special euroconnector of your

video recorder. See also the handbook of your video

recorder.

To connect your video recorder to the TV, see TV and

Video Recorder section.

If you want to connect more equipment to your TV,

consult your dealer.

11) Connecting Headphones

Use the stereo headphone socket on the lower right

side of your TV, to connect headphones.

EU2845ST&2845W-MAV-1541-ENG-STEREO-AK45.p65

09.09.2003, 10:54