Troy-Bilt storm 2840 Benutzerhandbuch

Snow thrower controls and features are described below and 

illustrated  in Fig. 4-1. 
NOTE:  For detailed information on all engine controls, refer to 

the separate Briggs & Stratton Engine Operator’s Manual.

The shift lever is located in the right side of the 

handle panel and is used to determine ground 

speed and direction of travel.

There are six forward (F) speeds. Position one (1) is 

the slowest and position six (6) is the fastest. 

There are two reverse (R) speeds. One (1) is the 

slower and two (2) is the faster.

The choke control is found on the top of the engine and is 

activated by rotating the knob. Activating the choke control 

closes the choke plate on the carburetor and aids in starting the 

engine.

The ignition key is a safety device. It must be fully inserted in 

order for the engine to start. Remove the ignition key when the 

snow thrower is not in use.
Note: Do not turn the ignition key in an attempt to start the 

engine. Doing so may cause it to break.