Troy-Bilt storm 2840 Benutzerhandbuch

With the throttle control in the Fast (rabbit) position, move 

1. 

shift lever into one of the six forward (F) positions or two 

reverse (R) positions. Select a speed appropriate for the 

snow conditions and a pace you’re comfortable with. 
Squeeze the drive control against the handle the snow 

2. 

thrower will move. Release it and drive motion will stop.

To engage the augers and start throwing snow, squeeze 

1. 

the auger control against the left handle. Release to stop 

the augers.

The augers are secured to the spiral shaft with two shear pins 

and cotter pins. If the auger should strike a foreign object or ice 

jam, the snow thrower is designed so that the pins may shear. If 

the augers will not turn, check to see if the pins have sheared. 

See Fig. 5-1.

NEVER replace the auger shear pins with 

anything other than OEM Part No.738-04124A 

replacement shear pins. Any damage to the auger 

gearbox or other components as a result of failing to 

do so will NOT be covered by your snow thrower’s 

warranty.

Always turn off the snow thrower’s 

engine and remove the key prior to replacing shear 

pins.