Epson LX-300+II Benutzerhandbuch
24
Paper Handling
4.
Press the LF/FF D button to move the top-of-form position higher on
the page, or press the Load/Eject U button to move the top-of-form
position lower on the page.
the page, or press the Load/Eject U button to move the top-of-form
position lower on the page.
Note:
❏
The printer has a minimum and a maximum top-of-form position. If
you try to adjust it beyond these limits, the printer beeps and stops
moving the paper.
you try to adjust it beyond these limits, the printer beeps and stops
moving the paper.
❏
When the paper reaches the default top-of-form position, the printer
beeps and stops moving the paper briefly. You can use the default
position as a reference point when adjusting the top-of-form position.
beeps and stops moving the paper briefly. You can use the default
position as a reference point when adjusting the top-of-form position.
5.
After you set the top-of-form position, press the Pause button to
exit the Micro Adjust mode.
exit the Micro Adjust mode.
Note:
❏
Your top-of-form position setting remains in effect until you change it,
even if you turn off the printer.
even if you turn off the printer.
❏
The top margin setting made in some software applications overrides the
top-of-form position setting you make with the Micro Adjust feature. If
necessary, adjust the top-of-form position in your software.
top-of-form position setting you make with the Micro Adjust feature. If
necessary, adjust the top-of-form position in your software.
❏
If you want to restore the printer’s default top-of-form position, you can
reset the printer. See page 37 for instructions.
reset the printer. See page 37 for instructions.