Epson 4012033-00 XXX Benutzerhandbuch

Seite von 81
2-20      
Using EPSON Photo!3
L
Proof Sign-off:
K. Pipa
_______
M. Fujimori
_______
R. Thomson
_______
R4C5700
Rev. C
A5 size
PHT3.FM
4/6/01
Pass 0
Changing computer connection settings
You can change the way that your computer and 
camera communicate using the Port and Speed 
settings. You can also test the connection and establish 
communication by clicking the Test Connection 
button. Connection information appears in the 
Computer Connection window.
Note:
Make sure that the camera’s dial switch is set to 
 
(for PhotoPC 3000Z), or 
 (for PhotoPC 850Z and 
800).
Do not change the Port and Speed settings from Auto 
unless you know the configuration of the serial port 
that you want to use. If you change the Port and Speed 
settings, you may lose the connection between the 
camera and your computer.
Changing the communication port
You can change the communication port that is used 
to connect the camera to your computer. When Auto 
is selected on the Setup menu, EPSON Photo!3 selects 
the port automatically. If you wish to specify the port 
yourself, refer to the appropriate section below for 
your operating system.
For Windows
Depending upon the type of cable that you are using 
to connect your camera to your computer, you can 
select Auto, USB, or any available COM port, from 
COM1 to COM9.
For Macintosh
Depending upon the type of cable that you are using 
to connect your camera to your computer, you can 
select Auto, USB, Modem Port, or Printer Port.
Changing the serial communication speed
You can change the speed at which EPSON Photo!3 
communicates with the camera. When Auto is 
selected on the Setup menu, EPSON Photo!3 
automatically selects the fastest possible 
communication speed. The following speed settings 
are available:
Auto, 19200, 38400, 57600, 115200, and 230400 bps.