Epson 4012033-00 XXX Benutzerhandbuch

A5 size

PHT3.FM

4/6/01

Pass 0

R

Proof Sign-off:
K. Pipa

_______

M. Fujimori

_______

R. Thomson

_______

2

Note:
❏

For Windows, the 230400 bps setting is only available 
if your PC has a high-speed serial interface and driver.

❏

For Macintosh, the 115200 and 230400 bps settings 
are only available in System 7.5.3 or higher.

❏

When USB is selected as the Port setting, you cannot 
change the communication speed.

The Computer Connection window displays the 
current status of the camera and the connection to the 
computer. If there is a problem with the connection, 
EPSON Photo!3 provides information in this window 
to help you solve the problem.

Follow the steps below if you receive an error message 
in the Computer Connection window.

1.

Make sure that both Port and Speed settings on 
the Setup menu are set to Auto.

2.

Make sure that the cable is connected correctly, as 
described in “Connecting the Camera to Your 
Computer” on page 1-1.

3.

Make sure that the camera’s dial switch is set to 

 (for PhotoPC 3000Z) or 

 (for PhotoPC 850Z 

and 800).

4.

Make sure that the interface port on your 
computer that is used to connect to the camera is 
enabled and is properly configured.

5.

Click the Test Connection button on the Setup 
menu to test the connection between your camera 
and the computer.

The camera’s current internal time and date settings 
are displayed in the Time and Date fields. You can 
change these settings by clicking the Set Time button. 
You can also change the name that is used to identify 
your camera in the Camera Id box.