Sanyo plc-xl40 Benutzerhandbuch
26
Press the INPUT button on the top control or the
COMPUTER button on the remote control to select either
Computer 1 or Computer 2.
Before using the INPUT or COMPUTER buttons, select the
correct input source through Menu operation as described
below.
COMPUTER button on the remote control to select either
Computer 1 or Computer 2.
Before using the INPUT or COMPUTER buttons, select the
correct input source through Menu operation as described
below.
Press the MENU button to display the On-Screen
Menu. Use the Point
Menu. Use the Point
7 8
buttons to move the red
frame pointer to the Input Menu icon.
1
Input Menu
Use the Point
ed
buttons to move the red arrow
pointer to either Computer 1 or Computer 2, and then
press the SELECT button.
press the SELECT button.
2
After the Source Select Menu appeared for Computer
1, move the pointer to RGB and then press the
SELECT button.
1, move the pointer to RGB and then press the
SELECT button.
3
Input Menu
COMPUTER button
Computer 1
Computer 2*
Input Source Selection
Direct Operation
Menu Operation
Computer Input
Move the pointer (red arrow)
to Computer 1 and press the
SELECT button.
to Computer 1 and press the
SELECT button.
Input Menu icon
Move the pointer (red arrow)
to Computer 2 and press the
SELECT button.
to Computer 2 and press the
SELECT button.
Move the pointer to RGB
and press the SELECT
button.
and press the SELECT
button.
Source Select Menu
Remote Control
COMPUTER button
✔
Notes:
•Computer 2 is not displayed when the COMPUTER IN
2/MONITOR OUT terminal is set as Monitor out (p.45).
•Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only
the RGB signal.
Computer 1
Video
Computer 2*
INPUT button
Top Control
INPUT button
ON
-
OFF
POWER
KE
INPUT
WARNING LA
MENU
SELECT
Computer
1
*See Notes at the bottom of this page.