Sanyo plc-xl40 Benutzerhandbuch
28
Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical
positions to conform to your computer.
positions to conform to your computer.
Move the red frame pointer to the
Auto PC Adj. item and press the
SELECT button.
Auto PC Adj. item and press the
SELECT button.
“Please wait...” appears while
Auto PC adjustment is in process.
Auto PC adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
To store the adjusted parameters
The system parameters adjusted in the Auto PC
Adjustment can be stored in the projector. Once
parameters are stored, the setting can be done just by
selecting a Mode in the PC System Menu (p.27). See
“Store” on page 30, for details.
The system parameters adjusted in the Auto PC
Adjustment can be stored in the projector. Once
parameters are stored, the setting can be done just by
selecting a Mode in the PC System Menu (p.27). See
“Store” on page 30, for details.
✔
Notes:
•Fine sync, Total dots, Horizontal, and Vertical positions of some
computers cannot be fully adjusted with this Auto PC Adjustment
function. When the image is not provided properly with this
operation, manual adjustments are required (pp.29–30).
function. When the image is not provided properly with this
operation, manual adjustments are required (pp.29–30).
•The Auto PC Adjustment cannot be operated when 480i, 575i,
480p, 575p, 720p,1035i, or 1080i is selected in the PC System
Menu (p.27).
Menu (p.27).
Auto PC Adjustment
Press the MENU button to display the On-Screen
Menu. Use the Point
Menu. Use the Point
7 8
buttons to move the red
frame pointer to PC Adjust Menu.
1
2
Use the Point
ed
buttons to move the red frame
pointer to Auto PC Adj. and then press the SELECT
button twice.
button twice.
Auto PC Adj.
Menu Operation
The Auto PC adjustment function can be operated directly
with the AUTO PC button on the remote control.
with the AUTO PC button on the remote control.
Remote Control
AUTO PC button
Direct Operation