Trimble Outdoors aggps 332 Benutzerhandbuch
C NMEA-0183 Messages
9 0 AgGPS 332 GPS Receiver User Guide
C.10
MSS (Beacon Receiver Signal Status)
The MSS message identifies the status of the beacon signal, including
the beacon signal strength, beacon signal-to-noise ratio (SNR), beacon
frequency, and beacon bit rate.
the beacon signal strength, beacon signal-to-noise ratio (SNR), beacon
frequency, and beacon bit rate.
The MSS message structure is:
$GPMSS,52.5,23.7,287.0,100*4C
Table C.10 describes these fields.
Note –
Because the contents of this NMEA message do not change
significantly during a one-second interval, the receiver outputs this
message at a maximum rate of 1 Hz.
message at a maximum rate of 1 Hz.
Table C.10
MSS message fields
Field
Description
1
Signal strength (SS), dB ref: 1
υV/m
2
Signal-to-Noise Ratio (SNR), dB
3
Beacon frequency, 283.5–325.0 kHz
4
Beacon bit rate (25, 50, 100, 200), bits per second
5
Channel number