Trimble Outdoors aggps 332 Benutzerhandbuch

2          Overview

6      AgGPS 332 GPS Receiver User Guide

Figure 2.1 shows the connector ports on the AgGPS 332 receiver.

Figure 2.1

AgGPS 332 receiver connector ports 

The two connectors (Port A and Port B) can perform the following 
functions:

accept power

accept TSIP, RTCM, ASCII, and (if enabled) CMR inputs

output RTCM, TSIP, and NMEA messages

output 1 PPS signals

provide support for the J1939 (CAN) serial bus

For more information about the inputs, outputs, and LCD display, see 
the information in the rest of this section.