Ariens sno-thro 932105 - 8526 , 932506 - 8526 Benutzerhandbuch

GB - 9

Keep all hardware properly tightened. Check 
shear bolts frequently. 

Maintain or replace safety and instruction 
labels, as necessary.

NEVER store unit with fuel in fuel tank, inside 
a building where any ignition sources are 
present such as hot water heaters, space 
heaters, or clothes dryers. Allow the engine to 
cool before storing in any enclosure.

Shut off fuel and allow engine to cool 
completely before storing in closed area or 
covering unit.

For extended storage, clean unit thoroughly. 
See Engine Manual for proper storage.

Use only attachments or accessories designed 
for your unit. 

Check components frequently. If worn or 
damaged, replace with manufacturer’s 
recommended parts.

• Pliers

• Open-End Wrenches: 3/8, 7/16, 1/2, 9/16" 

and/or Adjustable Wrench

• Tire Gauge

1. Remove lower wing knobs on handlebar 

assembly (Figure 4).

2. Remove upper wing nut and bolt on shift 

rod.

3. Loosen upper wing knobs on handlebar.

4. Loosen lower wing nut and bolt on shift 

rod.

5. Put speed selector lever into fastest 

reverse panel notch.

6. Rotate handlebar up so wing knob holes 

align. Install and tighten all wing knobs.

7. Install wing nut and bolt removed in step 2 

on shift rod and tighten hardware.

WARNING: AVOID INJURY. Read 
and understand the entire Safety 
section before proceeding.

WARNING: Dropping or tipping over 
boxed unit could result in personal 
injury or damage to unit.

Figure 3

OS1642

1. Sno-Thro Unit
2. Chute Crank
3. Discharge Chute

4. Literature Pack 

with Extra Shear 
Bolts