Epson professional series ii Benutzerhandbuch

If you are connecting only one monitor to the video

interface, make sure the 

 

switch is set to 

(the factory setting). As long as you use only one

monitor with your computer’s video controller, do not
set the 

 

switch to 

HIGH 

because this causes

excessive brightness and lowers the resolution.

3. Plug one end of the video interface cable that comes with the

monitor into the VGA connector labeled 

D-SUB INPUT 

and

tighten the screws on the cable connector.

4. Plug the other end of the video cable into the video interface

on your computer and tighten the connector screws. (See

your computer and/or video adapter card manual for more

detailed instructions.)

5. Plug the monitor’s power cord into the AC power inlet on

the back panel and then into a grounded (earthed) electrical
outlet. The monitor contains a universal (90 to 264 VAC)
power supply, so you do not need to check the voltage of
your power supply.

II