Adtran MX2800 M13 Benutzerhandbuch
3-8
61200290L1-1G
Section 3, Configuration
MX2800 M13 Multiplexer User Manual
3. T1/E1 INTERFACE
The T1/E1 Interface menu, see
, is used to activate/deactivate individual T1s and E1s and to set
their line coding, length, loopback detection, circuit protection, and line ID string. The T1/E1 code viola-
tion threshold is also configured through this menu. Configuration selections are described in the following
sections.
tion threshold is also configured through this menu. Configuration selections are described in the following
sections.
NOTE
A DS2 can be divided into either three E1s or four T1s. Therefore, when
dealing with an E1 configuration, some of the fields in the T1/E1
Interface menus do not apply (and therefore display N/A).
dealing with an E1 configuration, some of the fields in the T1/E1
Interface menus do not apply (and therefore display N/A).
Figure 3-4. T1/E1 Interface Menu