Troy-Bilt TB130 Benutzerhandbuch

Your mower is shipped as a mulcher. To convert to side discharge, 

make sure grass catcher is off of the unit and rear discharge door 

is closed.
1. 

On the side of the mower, lift the side mulching plug as 

shown in Figure 3-9.

2. 

Slide two hooks of side discharge chute under hinge pin on 

mulching plug assembly. Lower the mulching plug. Do not 

remove side mulching plug at any time, even when you are 

not mulching.

b.  Slip plastic channel of grass bag over hooks on the 

frame. See Figure 3-7.

2. 

Follow steps below to attach grass catcher:

a.  Lift rear discharge door.
b.  Place grass catcher into the slots in the handle 

brackets as shown in Figure 3-8. Let go of discharge 

door so that it rests on the grass catcher.

To remove grass catcher, lift rear discharge door on the mower. 

Lift grass catcher up and off the slots in the handle brackets. 

Release rear discharge door to allow it to close rear opening of 

mower.