Troy-Bilt TB130 Benutzerhandbuch

The blade control is attached to the upper handle of the mower. 

Depress and squeeze it against the upper handle to operate the 

unit. Release it to stop engine and blade.

This blade control is a safety device. 

Never attempt to bypass its operations.

One adjustment lever is located near the right rear wheel and 

one is located near the right front wheel. Both levers have to be 

at the same relative position to ensure a uniform cut. To adjust 

the cutting height, refer to the “Assembly & Set-Up” Section.

The grass catcher, located at the rear of the mower, is used to bag 

the grass clippings for disposal at another site. Once the bag is 

full, remove it up through the handles using the strap provided 

and empty it before any further mowing.

The mulch plug is used for mulching purposes. Instead of 

collecting the grass clippings in a grass catcher or using the 

side discharge chute, some mower models have the option 

of recirculating the clippings back to the lawn. This is called 

mulching.

Your mower is shipped as a mulcher. To discharge the grass 

clippings to the side instead, follow the instructions in the 

“Assembly & Set-Up” section to attach the side discharge chute.

Keep hands and feet away from the 

chute area on cutting deck. Refer to warning label 

on the unit.

The recoil starter is attached to the right upper handle. Stand 

behind the unit and pull the recoil starter rope to start the unit.