Epson 10+ Benutzerhandbuch

The lamp lasts up to 3000 hours when the projector is used in Theatre Black mode. Lamp life 
results vary depending upon environmental conditions and usage. Turn the projector off 
when not in use. Continuous 24-hour-a-day use may reduce the overall life of this product. 
It’s time to replace the lamp when:

■

The projection image gets darker or starts to deteriorate.

■

The projector’s warning light flashes red.

■

The message 

Replace the lamp

 appears on the screen.

Contact your dealer or call Epson at (800) 873-7766 in the 
United States for a replacement lamp. Request part number 

V13H010L29

. In Canada, call (800) 463-7766 for dealer referral.

Be sure to read the “Important Safety Information” on page 5 before replacing the lamp. 

Warning: Let the lamp cool before replacing it. If the lamp breaks, handle the shards 
carefully to avoid injury. If your projector is mounted on the ceiling, take it down before 
beginning this procedure. 

The lamp component contains mercury. Please consult your state and local regulations 
regarding proper disposal or recycling, and do not place in the trash.

Caution: Never touch the lamp with your bare hands; the invisible residue left by the oil on 
your hands may shorten the lamp life. Use a cloth or gloves to handle the new lamp.

Note: Although an air filter is included with the lamp, you cannot use it with the projector. If 
you need to replace the air filter, ask for part number V13H134A04 when you contact your 
dealer or Epson. See page 27 for details on ordering.

Follow these steps to replace the lamp:

1. Turn off the projector and wait for the P power light to stop flashing.

2. Unplug the power cord and any cables. If the projector has been on, let it cool for at least 

an hour.

3. Press in on the two tabs and lift the lamp cover up and off.

.