Philips mcd290 Benutzerhandbuch
28
English
Changing tuning grid (not available
for all versions)
for all versions)
In North and South America, the frequency step
between adjacent channels in the MW band is
10 kHz (9 kHz in some areas). The preset
frequency step in the factory is 9 kHz.
between adjacent channels in the MW band is
10 kHz (9 kHz in some areas). The preset
frequency step in the factory is 9 kHz.
IMPORTANT!
Changing the tuning grid will erase all
previously stored preset radio stations.
Changing the tuning grid will erase all
previously stored preset radio stations.
1
Disconnect the system from the AC power
supply (pull out the AC power cord).
supply (pull out the AC power cord).
2
While holding down SOURCE and PLAY/
PAUSE 2; on the main unit, reconnect the
system to the AC power supply.
PAUSE 2; on the main unit, reconnect the
system to the AC power supply.
➜
The display will show “
GRID 9” or “GRID
10”.
Note:
– GRID 9 and GRID 10 indicate that the tuning
grid is in step of 9 kHz and 10 kHz respectively.
– GRID 9 and GRID 10 indicate that the tuning
grid is in step of 9 kHz and 10 kHz respectively.
Radio Reception
pg001-pg036_MCD290_98-Eng
2005.11.14, 14:50
28