Maxtor 10K V Benutzerhandbuch

4-10 Maxtor Atlas 10K V

 

Component Life:

5 years

Preventive Maintenance (PM):

Not required

Contact Start/Stop:

50,000 cycles at ambient, 

                                                35,000 at Environments

                                     
Annualized Failure Rate (AFR)

No greater than 0.58 percent

Drive reliability is closely related to the temperatures the drive is exposed to. The 
AFR is based on an operational design temperature ambient of 86° F (30° C)

Table 4-9 provides the error rates for the Maxtor Atlas 10K V hard disk drive.

Table 4-9   

1. Recovered read errors are errors which require retries for data correction. 

Errors corrected by ECC on-the-fly are not considered recovered read 
errors. Read on arrival is disabled to meet this specification. 

2. Uncorrectable read errors are those that are not correctable using an Error 

Correcting Code (ECC), or retries within the retry limits specified in the 
mode pages. The drive terminates the command either when a repeating 
error pattern occurs, or after both the specified number of retries and 
application of triple burst error correction fail to correct the error.

3. A seek error occurs when the actuator fails to reach or remain on the 

requested cylinder, and/or the drive requires the execution of the full 
calibration routine to locate the requested cylinder.

Recovered read errors

1

<10 events per 10

12

 bits read

Uncorrectable read errors

2

1 event per 10

15 

bits read