Hitachi 32ld8700c Benutzerhandbuch

- 20 -

Timers

Display the Main Menu by pressing the

button. Highlight the Timers line by pressing

buttons and press OK button to

display the Timer menu.

0DLQ0HQX

Up to five separate timer events can be set

and each is displayed in the Programme

Timers screen, showing the event number,
the channel to be selected, the start time,

end time, date and the mode - whether that

event is active (and will be acted on) or not.

To set an event, highlight its mode using

buttons and press OK button to dis-

play the timer entry window.

Here the six settings of channel type, chan-

nel name, start time, end time, date and fre-

quency mode can be set. You can move

freely between each setting using

buttons.
The channel type is set using or but-

tons. It enables displaying only the selected

type channels.
The channel name is set using or but-

tons to display the channel which broadcasts

the programme.
The start time, end time and date are each

set with the number buttons on the remote

control in 24-hour format.
The frequency mode determines how often

the receiver operates this event and is set
with the or buttons to be either Once,

Daily, or Weekly press OK button to com-

plete setup.

+LQW

,IDQLQYDOLGQXPEHUIRUWKHVWDUWRU

HQGWLPHVRUWKHGDWHLVHQWHUHG

³(QWHUHGWLPHLVQRWYDOLG´PHVVDJH

DSSHDUVRQWKHPHQX

RECORDING FROM IDTV
Connect your VCR to AV2 via a scart lead.
Set the AV2-OUT in the feature menu to

DDT, as illustrated and described on

page

Set the time as described above.
Set your TV to standby using the remote con-

trol.
Set your VCR to correspond with the time set

on your TV and select external input (refer to

your VCR instruction book).
NB. If you switch on your TV whilst the timer

recording is active and then switch back to

standby, the timer recording will be can-

celled; the timer setting will be deleted and

the desired programme will not be recorded.

1-ENG-3230W-HL02126 UK-32 INCH TFT (CHM)-PEU IDTV-NEW SOFT-50088657.p65

04.08.2006, 14:42