Hitachi 32ld8700c Benutzerhandbuch

- 21 -

TV Setup

To be able to go through TV functions, you

can use this item.
The digital TV Setup menu screen is ac-

cessed from the Main Menu. Press the

button to display the Main Menu and use

or buttons to highlight TV Setup. Press

OK button to display TV Setup menu

screen.
Detailed information for all menu items is

in AnalogueTV Menu System section on

page 22.

Common Interface

Press button to display the Main Menu

and use the or buttons to highlight the

Common Interface line and press OK

button.

0DLQ0HQX

It is required to subscribe to a pay channel

company to view the pay channels of the

Digital Terrestrial broadcasting.
Obtain the Conditional Access Module (CAM)

and the Viewing card by subscribing to a pay

channel company, then insert

into

the Televi-

sion using the following procedure.
1. Switch off the TV and unplug from the

mains.
2. Insert the CAM, then Viewing Card to

the slot that is located in the terminal

cover at the left-hand side of the TV (from

front view).
The CAM should be correctly inserted, it is

impossible to insert fully if reversed. The

CAM or the TV terminal may be damaged if

the CAM is forcefully inserted.

3. Connect the TV to the mains supply,

switch on and then wait for few moments

until the card is activated.
Some CAMs may require the following set

up. Please set the CAM by entering the IDTV

menu, Common Interface then pressing OK

button. (CAM set up menu is not displayed

when it is not required.)
To see the viewing contract information:
Enter IDTV; press button, then highlight

Common Interface and press OK button.
When no module is inserted, No Common

Interface module detected message ap-

pears on the screen.

Refer to the module instruction manual for

details of the settings.

1-ENG-3230W-HL02126 UK-32 INCH TFT (CHM)-PEU IDTV-NEW SOFT-50088657.p65

04.08.2006, 14:42