cortech datalog 3 Benutzerhandbuch

Datalog 3 User Manual - Page 24 of 66

CORTECH DEVELOPMENTS LTD

Many field panels have the ability to switch output relays. The Datalog 3 system also has the ability to
switch these output relays.

The output relays are assigned to named groups. A group can have 1 to 8 output relays assigned to it.
The Datalog 3 system can have up to 100 output groups. An output relay can belong to more than one
group.

These groups are set-up by the system provider at installation.

The output group is activated by:

1.

A zone going in to an alarm state

2.

Manually by the operator selecting the group from a list

3.

By Timezone

When the system is set-up at installation an output group can be assigned to a zone. The output group
can contain between 1 and 8 output relays.

When the zone goes into alarm it will automatically energise (set) the output relays. This is useful for
scenarios such as switching on flood lamps when an external infra-red sensor is tripped.

The outputs then remain set until the operator resets the alarm whereupon the outputs will de-energise
(reset).

The operator can switch a group of output relays by:

From the Main screen click ‘Log on’

The menu panel displays.

1.

Select ‘System’ ! ‘Output Control’

Or

 2.

Click Output Control button

The ‘Output Control Manual Control’ dialog box displays.

3.

Scroll and click on the relevant output group

The Description is highlighted.

4.

To activate or set the output relays press <Enter> key or double click the description

The output relays status changes to set and a red colour.

5.

To de-activate or reset the output relays press <Enter> key or double click the description

The output relays status changes to Reset and a green colour.