Hoyt recurve-2004 Benutzerhandbuch

9

The Matrix and AeroTec limb pocket design is the most
advanced pocket alignment adjustment system available today.
This  limb alignment system maintains its settings in all condi-
tions.  You can adjust your limb alignment to make it perfectly
compatible to the riser simply by removing or adding the sup-
plied washers to the alignment dowel.

To adjust your pocket follow these directions:

1. Unscrew the alignment locking screw and remove the align-
ment cap and washers.  Pull the alignment dowel and washers
out from the sight window side of the pocket.  (Do not lose any
parts!).

2. (Refer to the limb visual above) If your limb is showing
Condition A: Simply ADD washers to the SIGHT WINDOW
SIDE (MAXIMUM OF 4) of the alignment dowel.  If your limb
is showing Condition B:  REMOVE WASHERS  from the sight
window side of the dowel. Limit your adjustments to one wash-
er at a time. You can store any unused washers between the riser
and alignment cap because
the washers on the alignment
cap (non-sight window) side
of the pocket do not affect the
alignment.