Hoyt recurve-2004 Benutzerhandbuch

10

3. To reassemble the pocket, first insert the alignment dowel and
washers in the riser (be sure to always put the alignment dowel
in on the sight window side of the riser).  Place the washers,
alignment cap and alignment locking screw in the dowel. Be sure
washers are not caught on the threads of the alignment screw,
they must be flat against dowel shoulder prior  to tightening.  

Rotate the dowel until the flat surface of the dovetail slot match-
es the flat surface of the limb pocket. Then securely tighten the
dowel locking screw with the supplied allen wrench.

A nocking point marks the exact position of the arrow on the
bowstring for each shot.  To apply your nocking point, slip an
adjustable nock set on the center serving, and slide it into posi-
tion.  Initially, set the nocking point at approximately 3/8" above
the level point of the rest.  Close the nock set with nocking pli-
ers so it is firm, but do not over tighten the nock set as it could
break your serving.

The final step of tuning is to position your center shot.  To start,
position the arrow slightly outside of the center of the bowstring.
To do that, begin by nocking an arrow and placing it on the arrow
rest. Do not draw the bow, but position yourself behind the string