Lennox gas stove Benutzerhandbuch

* Other approved chimney brand is Simpson Dura-Vent DV-GS.

 Residential

 Vented vertical and horizontal

 Manufactured (mobile) home

 Natural gas (NG) or propane (LP)

 Bedrooms

 Optional wall-mounted or remote thermostat

This  stove  can  be  vented  with  Security™  Secure  Vent™

pipe*. Coaxial pipe diameters are 6-5/8” outer and 4” inner.

The combustion air for this stove is drawn from outside the

house through the outer DV (direct vent) pipe. Room air is

not required for combustion.

When planning your installation, select the correct length of

vent pipe for your particular requirements. Determine the

minimum clearance to combustibles from the rear of the

unit to the wall. It is also important to note the thickness

of the wall. Before cutting the vent hole through the wall

make sure that ALL vent and termination clearances (see

page 15) will be met.

The standard fan motor requires 120 Volts AC for operation.

The stove is not dependent on the fan or an outside electri-

cal  supply  to  operate.

This stove is operated with a millivolt valve and therefore

burns even during a power outage.

This stove comes from the factory equipped to burn natural

gas at a specified elevation. The stove can be converted to

burn LP gas (liquid propane) by changing the cassette (valve

and pilot assembly) or installing a conversion kit. Only Len-

nox Hearth Products conversion kits can be used to convert

from NG to LP or LP to NG. Contact your Lennox Hearth

Products dealer for details.

Pipe:Type - direct-vent

Recommended manufacturer*

Security™ Secure Vent*

Diameter - 6-5/8”x 4” for all installations

The Vision™ gas stove comes with the following parts:

1 Stove Body with Burner Cassette

1 150 CFM Blower

1 3/8”x 8” Gas Pipe

1 Brick Panel

1 Log Set

1 Bag of Ember Material

1 Installation and Operation Manual

•  Wall-mounted or Remote Thermostat

•  Painted, Gold, or Nickel Plated Door Trim & Grill Assembly

(required)

u

w

u

u

v

w