Mackie TT24 Benutzerhandbuch

Mackie TT24 Digital  Live Console Owner’s Manual

Quickstart Tutorial

17

This section illustrates how to connect a CD/tape device to the dedicated CD/

TAPE A or B connectors (A = RCA, B = TRS), and to channels 23/24 to demon-

strate stereo linking and channel strip processing.

1. Connect the CD player into CD/TAPE A or B (Figure 2-1).
2. Press the UTIL button (Figure 2-4).

Figure 2-6 Stereo Input Assign

3. Touch STEREO INPUT ASSIGN on the Touchscreen (Figure 2-6). 
4. Touch TAPE/CD A or TAPE/CD B in the INPUT SELECTION area 

5. Select L/R in the GRP ASSIGN area to route the stereo source to the 

LEFT and RIGHT MAINS outputs. 

6. Adjust MUTE and SOLO from the Touchscreen.
7. Adjust the stereo input fader to desired level from its QuickMix knob.

1. Move the CD to the channel 23 and 24 LINE connectors.
2. Set the LINE switch to the down position (line level).
3. Press and hold channel 23 

and

 24’s SELECT switches until the Link 

Channels dialog appears in the Touchscreen. 

4. Touch OK to approve the channel linking.
5. Press the PAN button in the V-POT CONTROL area (Figure 2-3). 

Stereo
Input

Assign