Mackie TT24 Benutzerhandbuch
Mackie TT24 Digital Live Console Owner’s Manual
Quickstart Tutorial
21
2.5
Effects
Four effects processors can each use one of the following effects: reverb, reverb
through gate, mono/stereo/ping pong delay, chorus, and flange. The default
effect sends are Aux sends 9–12 but any Aux or Matrix sends can be used. The
effect returns are on the Returns bank.
1. Press the ANLG bank button.
2. Press AUX SENDS 9 in the V-POT CONTROL area.
3. Turn channel 1’s V-Pot to 3:00 to set channel 1’s level to Aux 9.
4. Press the EFX QuickMix button.
2. Press AUX SENDS 9 in the V-POT CONTROL area.
3. Turn channel 1’s V-Pot to 3:00 to set channel 1’s level to Aux 9.
4. Press the EFX QuickMix button.
The INTERNAL EFX Touchscreen opens (left of Figure 2-10).
Figure 2-10 Internal Effects and Chorus screens
5. Touch the Edit button next to Chorus to edit its parameters on its own
6. Press the RTRNS bank button.
7. Speak into the mic and increase the Returns levels (INT EFX 1L and
7. Speak into the mic and increase the Returns levels (INT EFX 1L and
INT EFX 1R) to set the desired amount of effect.