Quadra-Fire 7046-137C Benutzerhandbuch

Seite von 52
Page  2
7046-137C
December 15, 2009
R
2700-I ACC Wood Insert
Thermal
Protection
Required
Adj. Hearth 
Support
1/4 inch (6.35)mm), 
R value = 0.13 
0 to 3-1/2 inch 
(0 to 89mm)
CANADA ONLY
Hearth Height
0 to 3-1/2 inches
(0 to 89mm)
Full Reline 
Required
3-1/2 in. 
(89mm)
Thermal
Protection
NOT
Required
Adj. Hearth 
Support
Greater than
3-1/2 inch 
(89mm)
USA and CANADA 
Hearth Height Greater 
than 3-1/2 inches 
(89mm)
Full Reline 
Required
3-1/2 in. 
(89mm)
Non-Combustible
Ember Protection
Figure 32.1 -
 With Adjustable Hearth Support Accessory
Zero Clearance Floor Protection
Figure 32.3 - 
With Adjustable Hearth Support Accessory
Thermal
Protection
NOT 
Required
Adj. Hearth 
Support
0 to 3-1/2 inch 
(0 to 89mm)
USA ONLY
Hearth Height
0 to 3-1/2 inch
Full Reline 
Required
3-1/2 in. 
(89mm)
Non-Combustible
Ember Proctection
Figure 32.2 - 
With Adjustable Hearth Support Accessory
USA and CANADA 
Build On-Site Hearth 
Support Accessory
Full Reline 
Required
3-1/2 in. 
(89mm)
See Table 
Above
1 inch (25mm) airspace 
between top & bottom of 
opening is required and 
made from non-
combustible building 
materials
0 to -1/2 in (0 to 89 mm)
          1/4 in (6.5mm) Thermal, R = 0.1
Greater -1/2 in (89mm)
            None
CANADA
USA
0 to -1/2 in (0 to 89 mm)
          Non-combustibe Ember Protection
Greater -1/2 in (89mm)
            None
Figure 32.4- 
Without Adjustable Hearth Support Accessory