Cub Cadet 933 SWE Benutzerhandbuch

Snow thrower controls and features are described below and 

illustrated  in Fig. 4-1. 
NOTE:  For detailed information on all engine 

controls, refer to the separate Engine Operator’s 

Manual supplied with this unit.

The speed selector lever is located in the right 

side of the handle panel and is used to determine 

ground speed and direction of travel.

There are six forward (F) speeds. Position one (1) is 

the slowest and position six (6) is the fastest. 

There are two reverse (R) speeds. One (R1) is the 

slower and two (R2) is the faster.

When engaged, the augers rotate and draw snow into the auger 

housing.

Snow drawn into the auger housing is discharged out the chute 

assembly.

Position the skid shoes based on surface conditions. Adjust 

upward for hard-packed snow. Adjust downward when 

operating on gravel or crushed rock surfaces.