Hitachi vhs vt-fx611a Benutzerhandbuch
Getting Started
15
7 Switch the RF or Video Channel
When the VCR is on, its video signal can come into your TV on either channel 3
or channel 4. You need to select the appropriate channel.
or channel 4. You need to select the appropriate channel.
If you already have a tape in the VCR, eject it. When the power is turned on,
press POWER to turn it off. Press PLAY/STILL on the VCR to turn the power on
again. Pressing the CHANNEL UP button on the VCR alternates between RFCH-
03 (channel 3) and RFCH-04 (channel 4) in the VCR's display. Display the
channel which is not used by a commercial channel in your area.
again. Pressing the CHANNEL UP button on the VCR alternates between RFCH-
03 (channel 3) and RFCH-04 (channel 4) in the VCR's display. Display the
channel which is not used by a commercial channel in your area.
Your basic hookup is now complete. When you're ready to try hooking up a
second VCR or a video camera for a complete home entertainment system, see
Advanced Operations.
second VCR or a video camera for a complete home entertainment system, see
Advanced Operations.
Now turn the TV and VCR back around facing you and begin your quick tour of
the controls (page 15).
the controls (page 15).