Outback Power Systems vfx 3524m Benutzerhandbuch

Copyright 2003  



  OutBack Power Systems, Inc.                             

19009 62

nd

 Ave NE, Arlington   WA 98223 USA                                                                 

900-0027-1

                                                              

Tel 360 435 6030     Fax 360 435 6019                                                                      

Rev 7.2

      08/26/05 

                 

Page 43 

The STATUS screens allow the system user to check the operation of the FX system. Both AC and DC voltage and AC current meters 
are provided to enable monitoring, adjustment and troubleshooting of the system operation.   

The MODES section lets the user view and change the various modes for a specific FX by pressing the PORT button to access a 
specific FX.  The modes include inverter, ac in, charger, auxiliary, and equalize.  The operation of these modes can be changed by 
selecting the CHANGE MODE option on the screen.  This is helpful if the user wishes to quickly enable or disable a particular function 
of a specific FX if necessary.  If the system is “OutBack” stacked, only the Master’s modes, with the exception of the “Aux”, can be 
changed.  

MAIN----------------

6:54:42P

SUM STATUS SETUP ADV

↓

STATUS--------------
choose product:

MX

↓

STATUS/FX/PAGE1----
choose category:

MODES METER BATT PG2

↓

STATUS/FX/MODE--P00
inv control:

ON

CHANGE

DOWN STAT

MODE PORT

↓

STATUS/FX/MODE--P00
ac in control:

USE

CHANGE

UP

MODE

PORT

↓

STATUS/FX/MODE--P00
chr control:

AUTO

CHANGE

UP

MODE

PORT

↓

STATUS/FX/MODE--P00
aux control:

AUTO

CHANGE

UP

MODE

PORT

↓

STATUS/FX/MODE--P00
eq enabled:

No

CHANGE

UP

MODE

PORT

The MAIN screen is where the menu system starts.  The four words in the bottom line of the display 
correspond to the four buttons located below the display. The word in BOLD on the bottom line 
indicates the selection used to advance the display to the next screen.  Pressing the left two buttons 
simultaneously from anywhere in the menu will return you to this screen.
 
Selecting <STATUS> allows selection of the product type: 
<FX>

 

    

FX inverter/charger system 

MX  

    

MX60 PV MPPT charge controller 

 

 

Shows status and allows adjustment of Inverter, AC input, Charger, Aux, and EQ 

METER   

Provides the AC voltages and currents of the FX 

BATT          

Provides the battery voltage and charger set points and timers 

PG2   

    

Displays additional sections – ERRORS, WARNINGS and PG3 

 
The INV CONTROL screen lets you see the status of the inverter function of the FX.  Pressing the 
STAT button returns you to the first page of the status menu.  Pressing the CHANGE MODE button 
opens a screen that gives the options of turning the inverter OFF, turning the inverter ON, or putting 
the inverter into SEARCH.  Pressing PORT will access the next FX if a HUB is present. 

The AC IN CONTROL screen lets you see if the FX will accept an AC source at its input terminals.   
Pressing the UP button returns you to the previous page of the MODES menu.  Pressing the 
CHANGE MODE button opens a screen that gives the options of rejecting an AC source by pressing 
DROP or accepting an AC source by pressing USE.  Pressing PORT will access the next FX if a 
HUB is present. 

The CHR CONTROL screen lets you see what mode the charger is in.  Pressing the UP button 
returns you to the previous page of the MODES menu.  Pressing the CHANGE MODE button opens 
a screen that gives the options of turning the charger OFF or putting the charger into AUTO where it 
will follow the 5-stage charging algorithm.  Pressing PORT will access the next FX if a HUB is 
present. 
The AUX CONTROL screen lets you see the status of the auxiliary output.  Pressing the UP button 
returns you to the previous page of the MODES menu.  Pressing the CHANGE MODE button opens 
a screen that gives the options of turning the Aux OFF, turning the Aux ON, or putting the Aux into 
AUTO mode.  In AUTO mode it will follow the “Aux Output Function” and its parameters that can be 
set in the Advanced (ADV) menu.  Pressing PORT will access the next FX if a HUB is present. 

The EQ ENABLED screen lets you see if the FX is in an “equalize” charging cycle and can also start 
or stop a cycle.  Pressing the UP button returns you to the previous page of the MODES menu.  
Pressing the CHANGE MODE button opens a screen that gives the options of START or STOP to 
initiate or cancel an equalize charge.  Pressing PORT will access the next FX if a HUB is present.