Hoyt compound-2002 Benutzerhandbuch
12
only for shipping purposes. Warning! On some
shorter axle to axle models, adjustable cable
guard bars can be off-set too much causing the
cable to track off the cam. This can cause dam-
age to the bow or personal injury. To prevent
this from happening, NEVER SET THE BAR AT
THE THREE O’ CLOCK POSITION.
shorter axle to axle models, adjustable cable
guard bars can be off-set too much causing the
cable to track off the cam. This can cause dam-
age to the bow or personal injury. To prevent
this from happening, NEVER SET THE BAR AT
THE THREE O’ CLOCK POSITION.
CABLE GUARD GLIDE INSTALLATION
Hoyt USA uses a specially designed cable glide
that has off-set cable slots. To correctly install
the glide on all Hoyt models except the Excel
Cam, make sure that when the cables are insert-
ed into the glide the shortest slot is to the rear
and the longer slot closest to the grip. For all
Hoyt USA uses a specially designed cable glide
that has off-set cable slots. To correctly install
the glide on all Hoyt models except the Excel
Cam, make sure that when the cables are insert-
ed into the glide the shortest slot is to the rear
and the longer slot closest to the grip. For all
Excel Cam model bows, make sure that the
longest slot is to the rear and the shorter slot is
closest to the grip. (See fig 7)
longest slot is to the rear and the shorter slot is
closest to the grip. (See fig 7)
Note: If you have trouble pulling the cables back
far enough to get the glide over the end of the
cable guard bar, you will need to use a bow
far enough to get the glide over the end of the
cable guard bar, you will need to use a bow
Excel Cam
Glide Position
Glide Position
fig. 7