Hoyt compound-2002 Benutzerhandbuch

Seite von 30
To  check the idler
position, sight
down the buss cable
yoke and verify that
it lies between the
alignment marks on
the idler. It is not
critical where the
buss-cable yoke lies
between the align-
ment marks, but
simply that it is
within the marks.
Left handed bows require the same examination
except that their timing marks will lie on the bottom
of the idler on the side marked with an "L". In the
event that your buss cable yoke falls outside the align-
ment marks, you should take your bow to an author-
ized Hoyt dealer for adjustment prior to its next use.
String damage and poor arrow flight may result from
shooting improperly tuned equipment.   
20
TUNING
To tune your bow have on hand three fletched arrows
and three bare shafts, all identical and straight.  From
about 15 to 20 yards shoot your fletched arrows, making
necessary sight adjustments to hit the target at the same
spot each time.  Once you have sighted in, shoot the
three bare shafts and note where the group of bare
shafts are compared to the fletched arrows.  
If the bare shafts are grouping below the fletched
arrows, lower the nocking point.  (See fig 14)  If the bare
Alignment
Marks
String
Control
Cable
Buss Cable