Hoyt compound-2002 Benutzerhandbuch

18

VERSACAM DRAW LENGTH ADJUSTMENT
All VersaCams feature the patented InnerCam
adjustable draw length module system and adjustable
let-off. When adjusting the draw length on VersaCam
bows, both the module and draw-stop peg must be
adjusted. When the module is rotated to its furthest
position in the minus (-) direction, the module is in the
"A" setting (the shortest draw length position).
Rotating the module in the (+) direction to the next
hole available for the module screw is the "B" setting
which will provide approximately 1/2” longer draw
than the previous setting. Eight modules are available
for a total draw length range of 3-4”,

Year 2002 Hoyt VersaCam draw stop holes are num-
bered 1 thru 8 on VC-2 & VC-3 and 1 thru 7 on VC-1.
Each InnerCam module position has a set of draw-
stop peg positions that will provide a useable range of
effective let-off values. The table to the right provides
the correct peg setting for 80% effective let-off and
65% AMO let-off for each InnerCam module position.