Uniden exp 4241 Benutzerhandbuch

7

3) If you need the phone to pause during the dialing sequence, press 

the redial/p key to insert a two-second delay between the 

numbers. You can enter multiple pauses to increase the delay. 

Each pause counts as a digit.

4) Press the memory key again.
5) To store this number as one of the ten speed dial numbers, enter a 

digit from 0 to 9. If there is already a number in that speed dial 

setting, it will overwrite the previously stored number without 

warning. You will hear a confirmation tone indicating that the 

number has been stored.

1) When the phone is in standby mode, press the talk key, and listen for a dial tone. 
2) Press the memory key and enter the speed dial entry (0-9) that has the stored number you 

want to dial. (If you enter a digit that does not contain a stored number, the handset will 

beep rapidly, and the phone will not dial.)

The speed dial memory is not limited to phone numbers. You can store any number (up to 20 

digits) that you need to enter once your call connects. This is referred to as Chain Dialing.

For example, you can save your bank account number to speed dial memory. When you call 

your bank's telephone teller service and are prompted to enter your account number, simply 

press the memory key and the speed dial number where you stored your account number.

1) With the phone in standby mode, press the memory key twice.
2) Press the number of the speed dial entry. A tone indicates that the stored number is 

erased from memory.

The digital security code is an identification code used to connect the handset and the base 

unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. In the rare 

situation that you suspect another cordless telephone is using the same security code, you 

can change the code.
1) Remove the handset from the base unit. Press and hold the find hs key on the base.
2) While holding the find hs key, place the handset in the base unit. Leave the handset in the 

base for more than three seconds. A new random security code is set.

924.516925 – 926.704425 MHz
2,405.155942 – 2,411.718441 MHz

up077.fm  Page 7  Thursday, December 14, 2006  2:31 PM