Fujitsu C122-E180-01EN Benutzerhandbuch
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
CHAPTER 2 Before Using the REMCS Service
2.2 Connection Configuration for Connecting to the REMCS Center
2.2 Connection Configuration for Connecting to the REMCS Center
5
C122-E180-01EN
FIGURE 2.3 P-P connection (ISDN: e-mail) (using the network connected to a USER port)
Through a network that is not connected to a USER port
shows a configuration that uses the
REMCS port to connect to a network other than the network connected to a USER port.
There are two types of configuration: one has the REMCS port connected directly to the ISDN router, and
the other has the HUB (router) connected to configure a dedicated LAN with other units and to connect the
ISDN router to the HUB
Remarks
-
There are two types of configuration: one has the REMCS port connected directly to the ISDN router, and
the other has the HUB (router) connected to configure a dedicated LAN with other units and to connect the
ISDN router to the HUB
Remarks
-
The IP address for [MaintenancePort] must be set from the MMB Web-UI. However, DNS cannot be
specified.
specified.
-
Be sure to use the IP address to specify the SMTP server.
FIGURE 2.4 P-P connection (ISDN: e-mail) (using the REMCS port)