Crestron hbk-3000 smk-3000 Benutzerhandbuch
Hatch Back & Swivel Mount Kits
Crestron HBK-3000 & SMK-3000
Supplied Hardware
The hardware supplied in the kits is listed in the following table.
Supplied Hardware of the HBK-3000 and SMK-3000 (Hatchback &
Swivel Mount Kits)
Swivel Mount Kits)
HBK-3000 SMK-3000*
One (1) Metal Bracket
One (1) Swivel Mount Assembly
One (1) Plastic Cover
One (1) Metal Bracket
Four (4) Screws 4-40 X 3/16 inch
One (1) Metal Plate
One (1) Plastic Cover
Sixteen
(16)
Screws
(4) 4-40 X 3/16-inch
(4) 6-32 X 1/2-inch
(4) 8-32 X 5/8-inch
(4) 8-32 X 1-inch
(4) 6-32 X 1/2-inch
(4) 8-32 X 5/8-inch
(4) 8-32 X 1-inch
* The SMK-3000 mounting kit includes a template for preparing the mounting
surface.
surface.
Installation
This section provides an installation procedure for each kit. The only
tools required are #1, #2, and #3 Phillips screwdrivers.
tools required are #1, #2, and #3 Phillips screwdrivers.
HBK-3000 Assembly/Installation Procedure
To attach the HBK-3000 Hatch Back Kit to the TPS-3000 Touchpanel,
refer to the illustration on page 3 and perform the associated procedures.
refer to the illustration on page 3 and perform the associated procedures.
1. Remove the two screws A from the rear of the touchpanel that
correspond to the holes in the mounting tabs of the Metal Bracket.
2. Put the Metal Bracket in position on the rear of the touchpanel
base (mounting holes should align, and standoff posts should be
oriented as shown in the illustration). Secure the Metal Bracket to
the touchpanel using the two screws A removed in step 1.
oriented as shown in the illustration). Secure the Metal Bracket to
the touchpanel using the two screws A removed in step 1.
3. Make certain cable connections are secure, put the Plastic Cover
in position with the cables routed through the rear opening. Secure
the cover to the Metal Bracket using the four # 4-40X 3/16-inch
screws B supplied.
the cover to the Metal Bracket using the four # 4-40X 3/16-inch
screws B supplied.
2
• Hatchback & Swivel Mount Kits: HBK-3000 & SMK-3000
Installation Guide – DOC. 6110