Fujitsu image scanner fi-5950 Benutzerhandbuch

AP-2

Paper is not fed (pick error 
occurs frequently, or docu-

ment stops midway).

Do the documents satisfy the "Docu-
ment Quality" and the "Multifeed Detec-

tion Conditions" in the chapter 7 of the 

fi-5950 Operator’s Guide?

Use the documents that satisfy the "Document 
Quality" and the "Multifeed Detection Condi-

tions" in  chapter 7 of the fi-5950 Operator’s 

Guide.

Are the Separator roller or the Pick roll-

ers dirty?

Clean the Separator roller or the Pick rollers. 

Refer to the fi-5950 Operator's Guide  "4. DAILY 
CARE".

Are the Separator roller or the Pick roll-
ers worn out?

Replace the Separator roller or the Pick rollers. 
Refer to the fi-5950 Operator's Guide  "5. 

REPLACEMENT OF CONSUMABLES".

Is there any debris on the document feed 

path?

Remove any debris from the document feed path.

Have you set the Paper Thickness on the 

Operator panel?

Set the Paper Thickness thinner.

Refer to 

.

The generated images are 

elongated.

Are the Feed rollers or the Pinch rollers 

dirty?

Clean the Feed rollers or the Pinch rollers. Refer 

to the fi-5950 Operator's Guide "4. DAILY 

CARE".

Have you adjusted the Vertical Magnifi-

cation?

Start up the Software Operation Panel, select 

[Device Set] and then click the [Offset] button. 
Adjust the vertical magnification. Refer to the fi-

5950 Operator's Guide "8.3 Offset/Scan scale".

There is a shadow on the 

leading edge of the gener-

ated image.

Have you adjusted the offset (the scan-

ning starting position)?

Start up the Software Operation Panel, select 

[Device Set] and then click the [Offset] button. 

Adjust the offset setting. Refer to the fi-5950 
Operator's Guide "8.3 Offset/Scan scale".