Fujitsu plasmavision p42hta51e Benutzerhandbuch

See Page E-19 for the basic operation procedures.
[Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
[On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-24.)
[Input Terminal]: Can make an input terminal setting such as Video Input. (See P. E-25.)
[Channel Setting]: Can make channel settings. (See P. E-26.)
[Others]: Used to make Screen Orbiter and other settings. (See P. E-27–E-28.)

Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with 

CD

 , and then adjust with 

E

 

F

. Finally, press 

<

 to implement the adjustments.

You can use this option to select whether to display information.

Each time you press 

E

 or 

F

, one of the available choices appears in the following sequence:

<

 On (OSD:bright) < On (OSD:dark) <

[On (OSD:bright)]:  On-screen information shown in light color.

[On (OSD:dark)]:  On-screen information shown in dark color.

Press 

<

 to store.

* If the screen picture is too bright, some characters may be difficult to watch when [On (OSD:dark)] is 

selected.

You can use this option to select the language displayed on the screen.
(1) Select “Language” and press 

<

.

The “Language” selection screen will appear.

(2) Press 

C

 or 

D

 to select your desired language.

English
Deutsch

(German)

Español

(Spanish)

Français

(French)

Italiano

(Italian)

Nederlands

(Dutch)

Ðóññêèé 

(Russian) 

(3) Press 

<

.

The menu is displayed in the selected language.

Dot Clock

(mD-Sub)

You may find the vertically-striped pattern in pictures, 

depending on the clock frequency of your PC’s processor.

If you experience blurring, you can obtain a clearer picture by 

adjusting the “Dot Clock”.

Use 

E

 

F

 to adjust to minimize vertically-

striped pattern in pictures.

Clock Phase

(mD-Sub)

Pictures and the outline of letters may blur or flicker as the 

clock phase of your PC may be different. In this case, adjust the 

clock phase manually. Normally, the automatic setting ensures 

the optimal value.

When “Manual” is selected, use 

E

 

F

 to adjust 

to minimize pictures blur.

Clamp Position

(mD-Sub, Comp. 

video)

Adjusts the extremely dark or bright pictures. Normally, the 

automatic setting ensures the optimal value.

Use 

E

 

F

 to adjust pictures optimally.

Auto Calibration

(mD-Sub)

Adjusts the dynamic range of images to the optimum. 

Performed while a white screen signal is received.

Display the Auto Calibration screen.

Select “Execute” and press “

<

”. 

Press 

C

 or 

D

 to select “Yes”, and press 

“

<

”.

OSD selection screen

“Language” selection screen

01_E_7473.book  24 ページ  ２００６年９月６日　水曜日　午後２時３６分