bobcat t190 Benutzerhandbuch

Seite von 147
T190 Compact Track Loader
Operation & Maintenance Manual
48
Filling And Emptying The Bucket (Foot Pedals)
Filling
Figure 99
Figure 100
Lower the lift arms all the way (1[Figure 99].
Tilt the bucket forward (2[Figure 99] until the cutting
edge of the bucket is on the ground.
Drive slowly forward into the material. Tilt the bucket
backward (1) [Figure 100] all the way when the bucket is
full.
Drive backward away from the material.
WARNING
Load, unload and turn on flat level ground. Do not
exceed Rated Operating Capacity shown on sign
(decal) in cab. Failure to obey warnings can cause
the machine to tip or roll over and cause injury or
death.
W-2056-0903
Emptying
Figure 101
Keep the bucket low when moving to the area where you
want to empty the bucket.
Raise the lift arms (1) [Figure 101]. Level the bucket (2)
[Figure 101] while raising the lift arms to help prevent
material from falling off the back of the bucket.
Drive forward slowly until the bucket is over the top of the
truck box or bin.
Empty the bucket (2) [Figure 101]. If all the material is
near the side of the truck or bin, use the bucket tilt to
move it to the other side.
WARNING
Never dump over an obstruction, such as a post, that
can enter the operator cab. The machine could tip
forward and cause injury or death.
W-2057-0694
B-15944
B-15973
1
2
B-15965
B-15973
1
B-15950
B-15973
1
2