bobcat t190 Benutzerhandbuch
T190 Compact Track Loader
53
Operation & Maintenance Manual
Digging And Filling A Hole (ACS - Handles, SJC -
‘H’ Pattern)
‘H’ Pattern)
Digging
Figure 110
Lower the lift arms all the way (1) [Figure 110]. Tilt the
bucket forward (2) [Figure 110] until the cutting edge of
the bucket is on the ground.
bucket forward (2) [Figure 110] until the cutting edge of
the bucket is on the ground.
Drive forward slowly and continue to tilt the bucket
down (2) [Figure 110] until it enters the ground.
down (2) [Figure 110] until it enters the ground.
Tilt the bucket backward a small amount (3) [Figure 110]
to increase traction and keep an even digging depth.
Continue to drive forward until the bucket is full. When the
ground is hard, raise and lower the cutting edge (1 and 2)
[Figure 110] while driving forward.
to increase traction and keep an even digging depth.
Continue to drive forward until the bucket is full. When the
ground is hard, raise and lower the cutting edge (1 and 2)
[Figure 110] while driving forward.
Figure 111
Tilt the bucket backward (1) [Figure 111] as far as it will
go when the bucket is full.
go when the bucket is full.
Filling The Hole
Figure 112
Lower the lift arms (1) [Figure 112] and put the cutting
edge of the bucket on the ground (2) [Figure 112]. Drive
forward to the edge of the hole to push the material into
the hole.
edge of the bucket on the ground (2) [Figure 112]. Drive
forward to the edge of the hole to push the material into
the hole.
Tilt the bucket forward (2) [Figure 112] as soon as it is
past the edge of the hole.
past the edge of the hole.
If necessary, raise the lift arms to empty the bucket.
B-15944
B-15781A
B-15781B
B-15781B
3
2
1
B-15960
B-15781
1
B-15964
1
2
B-15781A
B-15781B
B-15781B