Zebra 49834 Benutzerhandbuch

Media Specifications

57518L-001 Rev. A

3/18/05

170PAX4 Maintenance Manual

17

Media width
(label and liner)

Minimum

3.0 in. (76 mm)

Maximum

7.1 in. (180 mm)

Minimum

Applicator mode

3.0 in. (76.2 mm) with backfeed on

1.0 in. (25.4 mm) with backfeed off

Rewind mode

1.0 in. (25.4 mm)

Tear-off mode

3.0 in. (76.2 mm) with backfeed on

1.0 in. (25.4 mm) with backfeed off

Registration tolerance 
(not including label/liner 
position tolerances)

Vertical 
(concurrent labels)

±0.040 in. (±1.0 mm) 
(in Applicator mode)

Horizontal

±0.040 in. (±1.0 mm)

Total thickness (including liner)

0.003 in. to 0.012 in. (0.076 mm to 0.305 mm)

Interlabel Gap
(Transmissive Sensor)

Minimum

0.079 in. (2 mm)

Preferred

0.118 in. (3 mm)

Maximum

0.157 in. (4 mm)

Size (W x L)

0.25 in. x 0.12 in. (6 mm x 3 mm)

Position

On inside edge, <0.8 in (<20 mm) from leading 
edge of media

Minimum

0.125 in. (3.2 mm)

Position

0.25 to 3.0 in. (6.3 to 76.2 mm) from inside edge

<0.8 in. (<20 mm) from leading edge of media

Black Mark 
(Reflective Sensor)

Vertical length (parallel 
to inside media edge)

0.12 in. to 0.43 in. (3 mm to 11 mm)

Horizontal width 
(perpendicular to inside 
media edge)

0.43 in. (11 mm) minimum

Position

One of the following:

• within 0.04 in. (1 mm) of the inside edge and 

<0.8 in (20 mm) from leading edge of media

• centered within 0.23 in. to 2.25 in. (5.8 to 

57 mm) from the media inner edge

Density

> 1.0 Optical Density Units (ODU)

Maximum media density: 0.5 ODU

0.464 in. (11.8 mm)

Must be uniform and must not exceed 2 lb. (907 g)

Must not exceed 4 lb (1814 g)

Applicator take-up pull tension must be uniform 
from 1 to 4 lb (454 to 1818 g) and must not vary 
more than ±20% during operation.