LaCie 2 Benutzerhandbuch

LaCie Network Space 2 

• DESIGN BY NEIL POULTON

 

Connecting to a Network

User Manual 

page 12

1.  Connect the Ethernet cable to the Ethernet port on the back of 

the LaCie Network Space 2 (

).

2.  Connect the other end of the Ethernet cable into an available 

Ethernet port on your router or hub (refer to your router or hub’s 
documentation if necessary). 

3.  Turn on the drive by pressing the power button on the back of 

the drive for two seconds (

).  The front LED will turn on 

and then begin blinking blue.

The drive is ready to be accessed once the blue LED has stopped 
blinking. Please be patient while the Network Space 2 starts for the 
first time.

 Depending on your computer’s Ethernet set-

tings, you may be able to connect the Network Space 2 directly to 
your computer using the Ethernet cable.

 

Gigabit Ethernet Cables And Connectors

See 

for an illustration of the Ethernet cable used to connect 

your LaCie Network Space 2 to your network device.  The ends of 
the Ethernet cable are the same and either end can be connected to 
the LaCie Network Space 2 or your router.

 

Fig. 06

Fig. 07 - Gigabit Ethernet cable ends (top view)

Fig. 05