LaCie 2 Benutzerhandbuch

LaCie Network Space 2 

• DESIGN BY NEIL POULTON

 

Introduction

User Manual 

page 9

1.3.3.  LED Behavior

The front LED changes to indicate different drive behavior (

). 

The following table sums up these behaviors.

LED Behavior

Indication

Off

Drive is turned off

Blue: Fast blinking

Drive is initializing

Blue: Static

Drive is ready

Blue: Flickering

Disk access

Red: Static

Disk failure

Red/Blue: blinking

Automatic backup in prog-
ress*

 Even if you have turned off the front LED us-

front LED to turn on.

• For details, refer to section 

.

 

Switching on the drive:

 Turn on the drive by pressing the power but-

ton on the back of the drive for two seconds. The front LED will turn 
on then begin blinking.

Switching off the drive:

 To turn off the drive, press and hold the 

power button for 5 seconds until the LED blinks. When the LED turns 
off, the drive has shut down.

 Another way to change the on/off/standby state of the Net-

work Space 2 is to use the Dashboard (see 

 and 

 

Fig. 03