Intel MFS5000SI Benutzerhandbuch

Seite von 33
Intel® Modular Server System MFSYS25  & Intel® Compute Module MFS5000SI 
 
• 
Intel will enable vendors to provide driver support for I/O Expansion Cards using these 
operating systems. 
• 
Intel will go through some of the steps to achieve certification to ensure its customers do 
not run across any problems, but the actual certification is the responsibility of the 
individual customer. 
   
For operating systems, adapter cards, and peripherals not listed in this 
document, there is no support commitment.  Intel will consider support requests 
on a case-by-case basis. 
 
1.2  Pass/Fail Test Criteria 
For each operating system, I/O Expansion card, and peripheral configuration, a test passes if 
specific criteria are met.  Specific configurations may have had particular characteristics that 
were addressed on a case-by-case basis.  In general, a configuration passes testing if the 
following conditions are met: 
ƒ 
The operating system installed without error. 
Manufacturer’s installation instructions or Intel’s best-known methods (BKMs) were 
used for the operating system installation. 
In some cases rKVM BKMs used involve  workarounds and were required during the 
operating system installation. 
The server system behaved as expected during and after the operating system 
installation. 
Application software installed and executed normally. 
ƒ 
Hardware compatibility tests ran to completion without error. 
ƒ 
Test software suites executed successfully 
Test and data files were created in the correct directories without error. 
Files copied from client to server and back compare to the original with zero errors 
reported. 
Clients remain connected to the server system. 
Industry standard test suites run to completion with zero errors reported. 
 
All Intel® Compute Module MFS5000SI testing was performed using the Intel® Server Modular 
System MFSYS25.  
 
 
Revision 1.4 
  
 
 
3