Lennox lss-ca35 Benutzerhandbuch

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Printed in U.S.A. © 2003 by Lennox Hearth Products

Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Step 5.  Slide the top cast iron piece (arched piece) as shown in
Figure 3 on to the two (2) holding screws protruding from the two
cast iron side pieces.

Step 6.  Adjustment of the set screws on the bottom corners of the
arch can be used to tighten the fit between the sides, the arch and the
wall (see 

Figure 4 ).  To adjust the set screw, it will be necessary to

remove the top arch.  Make adjustments in small increments until the
desired fit has been achieved.

Step 7.  Hook the bottom cast iron piece (with the top, up, as shown
in 

Figure 3 ) to the 4 holding screws protruding from the two cast

iron side pieces as shown in 

Figure 3.  See Figure 5 for the final

appearance of the installed cast iron facade.