Whirlpool 1188018 Benutzerhandbuch
3
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Through-the-Wall Installation
In addition to the tools listed above, the following tools are
needed for through-the-wall installation.
needed for through-the-wall installation.
Parts Supplied
Check that all parts are included in parts package.
Air Conditioner Installation
SMART-MOUNT
®
Tray Assembly Installation
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Make sure you have everything necessary for correct installation.
Make sure you have everything necessary for correct installation.
The location should provide:
■
Grounded electrical outlet within 4 ft (122 cm) of where the
power cord exits the air conditioner.
power cord exits the air conditioner.
NOTE: Do not use an extension cord.
■
Free movement of air in room to be cooled.
■
A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
parts are supplied for double-hung windows.
■
Adequate wall support for weight of air conditioner. Air
conditioner weighs 80 lbs (36.3 kg) to 125 lbs (56.7 kg).
conditioner weighs 80 lbs (36.3 kg) to 125 lbs (56.7 kg).
NOTE: Cabinet louvers must not be obstructed. Air must be able
to pass freely through the cabinet louvers.
to pass freely through the cabinet louvers.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
SAVE THESE INSTRUCTIONS
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
■
Flat-blade and Phillips
screwdrivers
screwdrivers
■
¹⁄₄" nut driver
■
⁷⁄₁₆" wrench
■
Scissors
■
Pencil
■
Tape measure
■
Level
■
Drill
■
³⁄₃₂" or smaller drill bit
■
Saw
■
Wood preservative
■
Caulk
■
1" (2.5 cm) or thicker
lumber
lumber
A. Window-lock bracket
B. #8 x
B. #8 x
³⁄₈
" pan-head screws (6)
C. #8 x
³⁄₄
" round-head screws (3)
D. #10 x
³⁄₈
" pan-head screws (3)
E. Side curtains (2)
F. Top channel
F. Top channel
G. Foam seal
H. Side curtain frames (2)
H. Side curtain frames (2)
F
A
B
C
D
E
G
H
A. Tray back
B. Tray center
B. Tray center
C. Tray sides (2)
D. Support legs (2)
D. Support legs (2)
E. #8 - 18 x
¹⁄₄
" hex-
head screws (4)
F. Flat washers (4)
G. Lock washers (4)
H. Hex nuts (4)
I. Carriage bolts (4)
J. #10 - 12 x 1
¹⁄₂
" slot-
head wood screws (2)
A. Cabinet louvers
A
B
C
D
E
F
G
H
I
J
A