eutech-instruments waterproof cyberscan con 400410 & tds 400 conductivitytds meter Benutzerhandbuch

Instruction Manual

CON 400/410

- 30 -

7.5 P4.0:

Unit

configuration

7.5.1

P4.1: READY indicator and auto
endpoint function

Program P4.1 lets you select “READY indicator on” to

indicate when your measurement is stable, or select

“READY indicator off” for faster meter response.

Program P4.1 also lets you switch the Auto endpoint

function on or off. Select auto endpoint on to “hold” your

measurement when it is stable for more than 5 seconds.

The display automatically freezes, and HOLD indicator

appears on the left side of the display. Press the HOLD

key to release the display and access other functions.

Select auto endpoint off to deactivate this feature.

From measurement mode

1. Press

SETUP key to enter Set Up mode.

2. Press

the

MI/

S or MR/T keys to scroll through

subgroups until you view parameter P4.0.

3. Press

ENTER key to select parameter 4.1.

4. Press

the

MI/

S or MR/T keys to select the

configuration you require.
• OFF switches the READY indicator off; ON

switches the READY indicator on. ON and HOLD

together switches the auto endpoint feature on.

5. Press

ENTER key to confirm selection and to

proceed to step 4 of P4.2. You can also press the

CAL/MEAS key to return back to measurement

mode.

NOTE: Meter default is set for Ready Indicator on, and auto

endpoint function off.

Figure 26 - Configuring the

READY feature