eutech-instruments waterproof cyberscan con 400410 & tds 400 conductivitytds meter Benutzerhandbuch
Instruction Manual
CON 400/410
- 37 -
7.8
P7.0: Setting the real-time clock
The meter features a real-time calendar and clock. This
helps you to meet the Good Laboratory Practice (GLP)
standards.
From measurement mode
1. Press
SETUP key to enter Set Up mode.
2. Press
the
MI/
S or MR/T keys to scroll through
subgroups until you view parameter P7.0.
3. Press
the
ENTER key to enter parameter P7.0. The
meter lets you select the century: “19—“ or “20—“. The
century digits will flash.
4. Press
the
MI/
S or MR/T keys to toggle to the correct
century.
5. Press
ENTER key to confirm the century and move to
“year” selection. The “year” digits will flash.
6. Press
the
MI/
S or MR/T keys to toggle to the correct
year. See Figure 33.
7. Press
ENTER key to confirm the year and move to
“month” selection. The “month” digits will flash.
8. Press
the
MI/
S or MR/T keys to toggle to the correct
month.
9. Press
the
ENTER key to confirm the month and move
to “date” selection. The “date” digits will flash. See
Figure 33.
10. Press
the
MI/
S or MR/T keys to toggle to the correct
date.
11. Press
the
ENTER key to confirm the date and move to
“hour” selection. The “hour” digits will flash. See Figure
34 (next page).
Figure 33 - P5.0: Setting century,
year, month and date